Licenseremove - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

licenseRemove

Removes the license key from the system.
Synopsis licenseremove "license"
Description Use this command to remove an existing license key from a switch. The existing license key must
be entered exactly as shown by licenseShow, including case.
When the key has been entered, use the licenseShow command to verify that the key has been
removed and the licensed product uninstalled.
After removing a license key, the switch must be rebooted. With no license key, licenseShow
displays "No licenses."
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands The following operand is required:
"license"
Examples To remove a license key from the switch:
See Also licenseAdd, licenseHelp, licenseIdShow, licenseShow
Fabric OS Command Reference
53-1000599-01
Specify the license key, in quotation marks. This operand is required
switch:admin> licenseremove "bQebzbRdScRfc0iK"
removing license key "bQebzbRdScRfc0iK"
2
licenseRemove
.
319