Snmpconfig - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

snmpConfig

Manages the SNMP agent configuration.
Synopsis snmpConfig --show | --set | --default [snmpv1 | snmpv3 | accessControl | mibCapability |
systemGroup | seclevel]
Description Use this command to manage the configuration of the SNMP agent in the switch. The configuration
includes SNMPv1 and SNMPv3 configuration, access control list (ACL), MIB capability, system
group, and security level settings. The command supports set, reset to default, and display
operations.
All values successfully changed by this command take effect immediately and are persistent across
power cycles and reboots. For dual-domain systems, this command is specific to the SNMP agent
associated with the current switch.
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command supports following operands:
--show
--set
--default
--show, --set, and --default support the following arguments:
Fabric OS Command Reference
53-1000599-01
Displays the SNMP agent configuration data of the specified category.
Sets the SNMP agent configuration data of the specified category. This
operand displays the current settings and then prompts you to change the
values for each parameter.
Sets the SNMP agent configuration data for a specified item to the default
values. Generally, these default values might be available in the configuration
database. It sets to factory default settings if the SNMP agent configuration
parameters are not available in the configuration database.
snmpv1 Selects SNMPv1-related configuration parameters. SNMPv1 parameters
include the community string, trap recipient IP address, and trap severity
level associated with each trap recipient IP address.
snmpv3 Selects SNMPv3-related configuration parameters. SNMPv3 parameters
include user name, authentication protocol and password, SNMPv3 trap
recipients IP address, associated user index, and trap severity level.
accessControl Selects access-control-related parameters. accessControl parameters
include access host subnet area and access permission (read-write).
mibCapability Selects configuration parameters related to the SNMP agent's MIBs and trap
capability parameters. mibCapability parameters include MIBs and traps
supported by the SNMP agent.
systemGroup Selects configuration parameters related to the system group. systemGroup
parameters include sysDescr, sysLocation, sysContact, and authentication
failure trap.
secLevel Sets SNMP security level.
2
snmpConfig
591