Fcrlsancount - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

fcrLsanCount

Displays or sets the maximum LSAN count.
Synopsis fcrlsancount [max-lsan-count]
Description Use this command to set or display the maximum number of LSAN zones that can be configured on
the router. By default, this limit is set to 3000, which is also the minimum. This parameter can have
the maximum value set to 5000. The maximum LSAN count limit is also displayed with command
fcrresourceshow. Only 3000 or 5000 are supported as valid count.
Operands If no operands are specified, this command displays the current LSAN zone limit.
This command has the following operands:
max-lsan-count
Examples To display the current LSAN limit:
To set the new LSAN zone limit:
See Also fcrResourceShow
Fabric OS Command Reference
53-1000599-01
Specifies the new LSAN count.
switch:admin> fcrlsancount
LSAN Zone Limit: 3000
switch:admin> fcrlsancount 5000
LSAN Zone Limit: 5000
2
fcrLsanCount
175