Fwclassinit - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

Brocade fabric os command reference guide v6.0.0 (53-1000599-01, april 2008)

Hide thumbs Also See for A7533A - Brocade 4Gb SAN Switch Base:

Table of Contents

fwClassInit

Initializes all classes under Fabric Watch.

Use this command to initialize all classes under Fabric Watch. The command should only be used

after installing a Fabric Watch license to start licensed Fabric Watch classes. Refer to fwConfigure

for a list of classes.

This command requires a Fabric Watch license.

The execution of this command is subject to Admin Domain restrictions that may be in place.

To initialize all classes under Fabric Watch: