Alishow - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

2

aliShow

aliShow
Displays zone alias information.
Synopsis alishow ["pattern"][, mode]
Description Use this command to display zone configuration information.
If an operand is specified, it is used as a pattern to match zone alias names; those that match in
the defined configuration are displayed.
This command can be issued only from the primary FCS switch.
Operands This command has the following optional operands:
"pattern"
mode
If no parameters are specified, all zone configuration information (both defined and effective) is
displayed. Refer to cfgShow for a description of this display.
Examples To display all zone aliases beginning with "arr":
See Also aliAdd, aliCreate, aliDelete, aliRemove
34
A POSIX-style regular expression used to match zone alias names. This
operand must be enclosed in quotation marks. Patterns may contain:
•
Question mark (?), which is a placeholder for any single character
•
Asterisk (*), which is a placeholder for any string of characters
•
Ranges, which are a placeholder for any character within the range.
Ranges must be enclosed in brackets: for example, [0-9] or [a-f].
Specify 0 to display the contents of the transaction buffer (the contents of the
current transaction), or specify 1 to display the contents of the nonvolatile
memory. The default value is 0.
switch:admin> alishow "arr*"
alias: array1 21:00:00:20:37:0c:76:8c
alias: array2 21:00:00:20:37:0c:66:23
Fabric OS Command Reference
53-1000599-01