Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 534

2
portShow
Front Phantom
Pr Switch Info
BB XLate
Authentication Type
DH Group
Hash Algorithm
Edge fabric's primary WWN
Edge fabric's version stamp
Following the general information, the command displays three columns of counters. The first
column shows interrupt statistics:
Interrupts
Unknown
Lli
Proc_rqrd
Timed_out
Rx_flushed
Tx_unavail
Free_buffer
Overrun
Suspended
Parity_err
2_parity_err
CMI_bus_err
The second column displays link error status block counters.
508
Information on the front phantom domain presented by this EX_Port. Includes
the preferred (if not active) or actual (if active) domain ID for the front domain
and the WWN of the front domain.
Information on the principal switch of the edge fabric attached to this
EX_Port. Includes the domain ID and WWN of the principal switch.
Information on the xlate (translate) phantom domain presented at this port.
Includes the preferred (if not active) or actual (if active) domain ID for the
xlate phantom domain and the WWN of the xlate phantom domain. The xlate
phantom domain connected at this port is in the same fabric as the router
and represents the edge fabric connected to the EX_Port.
Displays NONE or DH_CHAP. DH-CHAP is the only authentication type
supported on EX_ports.
Displays DH group [0-4] if DH-CHAP authentication is used. Otherwise
displays N/A.
Displays hash type (MD5 or SHA-1) if DH-CHAP authentication is
used.Otherwise, displays N/A.
If the EX_Port is connected to an edge switch with FCS policy enforcement,
The WWN of the primary FCS is displayed when the edge fabric is secure and
the primary FCS is online. Otherwise, displays "No Primary".
If the EX_PORT is connected to an edge switch with FCS policy enforcement,
the version of the security database is displayed. Otherwise displays N/A.
Total number of interrupts.
Interrupts that are not counted elsewhere.
Low-level interface (physical state, primitive sequences).
Frames delivered for embedded N_Port processing.
Frames that have timed out.
Frames requiring translation.
Frames returned from an unavailable transmitter.
Free buffer available interrupts.
Buffer overrun interrupts.
Transmission suspended interrupts.
Central memory parity errors.
Secondary Tx parity errors.
Control message interface errors.
Fabric OS Command Reference
53-1000599-01