Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 46

2
ag
--mapshow [N_Port]
--mapset N_Port [F_Port1; F_Port2;...]
--mapadd N_Port F_Port1 [; F_Port2;...]
--mapdel N_Port F_Port1 [; F_Port2;...]
--pgshow [Port Group ID]
--pgcreate- pgid 'N_Port1 [; N_Port2;...]" [-n pgname]
--pgadd pgid 'N_Port1 [; N_Port2;...]"
--pgdel pgid 'N_Port1 [; N_Port2;...]"
--pgrename pgid newname
20
Disables the specified port policy for the Access Gateway. When a policy is
disabled, all port related configuration settings will be lost. Use the
configUpload command to save the current port configuration.
Displays the F_Ports that are mapped to a given "primary" N_Port and are
currently routed through the specified N_Port This listing may not be the
same as the set of F_Ports configured for N_Port failover. Optionally specify
an N_Port to display the F_Ports that are mapped to this specified N_Port
only. Failover and failback policies are displayed as enabled (1) or disabled
(0).
Maps a set of F_Ports to a specified "primary" N_Port forcing all traffic from
the F_Ports to be routed through this N_Port to the attached fabric. An F_Port
cannot be mapped to more than one primary N_Port at any given time.
F_Ports will be enabled only if the N_Port is online. This command overwrites
existing port mappings. Use a blank list ("") to clear current mappings.
Adds one or more specified F_Ports to the mapping of an existing "primary"
N_Port. The traffic for the configured F_Ports will be routed to the fabric
through the specified N_Port when the F_Ports come online. An F_Port
cannot be mapped to more than one primary N_Port at the same time.
Deletes one or more specified F_Ports from the "primary" N_Port mapping.
Displays Port Group configuration. The port grouping feature supports
specifying a set of N_Ports to be included in the Port Group (PG) Policy. The
factory default PG is "pg0", which includes all N_Ports. It can not be removed
or renamed.
Creates a port group with the ID pgid and a specified list of N_Ports to be
included in the policy. The list must be enclosed in quotation marks. Ports
must be separated by semicolon. Maximum numbers of ports allowed in a
port group is MAX_PORT. Port Group ID must not exceed 64 characters.
Adds one or more N_Ports to the specified port group. The port list must be
enclosed in quotation marks. Ports must be separated by semicolon.
Deletes one or more N_Ports from the specified port group. Deleted ports are
added to the default port group "pg0". The port list must be enclosed in
quotation marks. Ports must be separated by semicolon.
Replaces the name of an existing port group with the specified new name.
Port Group ID must not exceed 64 characters.
Fabric OS Command Reference
53-1000599-01