Fcrresourceshow - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

fcrResourceShow

Displays FC Router physical resource usage.
Synopsis fcrresourceshow
Description Use this command to display the FC Router-available resources. The maximum number allowed
versus the currently used is displayed for various resources. The command output includes:
LSAN Zones
LSAN Devices
Proxy Device Slots
Phantom Node WWNs
Phantom Port WWNs
Port Limits
Max Proxy Devices
Max NR_Ports
Notes Only configured "EX/VEX" ports are displayed
Operands None
Fabric OS Command Reference
53-1000599-01
The maximum versus the currently used LSAN zones.
The maximum versus the currently used LSAN device database entries. Each
proxy or physical device constitutes an entry.
The maximum versus the currently sued proxy device slots. A proxy device is
presented to an edge fabric as being connected to a translate domain slot. A
lost is the port number and AL_PA combination. The slot-to-device WWN
association is persistently stored.
The maximum versus the currently allocated phantom switch node WWNs.
The phantom switch requires node WWNs for SFPF and manageability
purposes. Phantom node names are allocated from the pool sequentially and
are not reused until the pool is exhausted and rolls over. The last allocated
phantom node WWN is persistently stored. If the switch is disabled, the
phantom node WWNs are not returned to the pool until the system reboots,
because the phantom switch could still be accessible through other switches.
Across a switch reboot, the allocation starts from the next usable WWN from
the pool and not from the beginning.
The maximum versus the currently used phantom domain port WWNs.
Phantom domain ports require port WWNs for manageability purposes.
Phantom domain ports include ports connecting front and translate domains
(virtual ISLs), translate domain ports for proxy devices, and EX_Ports.
Phantom port names are allocated from the pool sequentially and are not
resumed until the pool is exhausted and rolls over. The last allocated
phantom port WWN is persistently stored. If the switch is disabled, phantom
port WWNs are not returned to the pool until the system reboots, because the
phantom switch might still be accessible through other switches. Across the
switch reboot, the allocation starts from the next usable WWN base from the
pool and not from the beginning.
Display per physical port (EX_Port) resources, which includes:
The maximum versus the currently used proxy device.
The maximum versus the currently used NR_Port entries. Destination
NR_Port entries are stored at every physical port for routing decision
purposes.
2
fcrResourceShow
187