Msconfigure - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

2

msConfigure

msConfigure
Configures the Management Server (MS) access control list (ACL).
Synopsis msconfigure
Description Use this command to configure the MS ACL. MS allows a SAN management application to retrieve
and administer the fabric and interconnect elements, such as switches. This application is located
at the Fibre Channel well-known address, 0xFFFFFA.
If the MS ACL is empty (default), MS is available to all systems connected to the fabric. By
populating the MS ACL with one or more World Wide Names (WWNs), access to MS is restricted to
those WWNs only.
This command is interactive and provides the user with the following menu of choices:
0
1
2
3
If the MS ACL is changed by adding or deleting WWNs, an additional prompt is given asking if the
MS ACL should be saved to nonvolatile storage. The saved MS ACL becomes effective upon reboot.
The MS ACL is implemented on a per-switch basis and should be configured on the switch to which
the management application is directly connected.
When FCS policy is enabled, the MS ACL is not used. In such a case, access to MS is controlled by
security by way of the MS_POLICY configuration.
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands none
Examples To display the MS ACL:
338
Done (with the administration)
Display the ACL
Add member based on its port/node WWN
Delete member based on its port/node WWN
switch:admin> msconfigure
0 Done
1 Display the access list
2 Add member based on its Port/Node WWN
3 Delete member based on its Port/Node WWN
select : (0..3) [1] 1
MS Access List consists of (5): {
20:01:00:60:69:00:60:10
20:02:00:60:69:00:60:10
20:03:00:60:69:00:60:10
20:02:00:60:69:00:60:03
20:02:00:60:69:00:60:15
0 Done
1 Display the access list
2 Add member based on its Port/Node WWN
3 Delete member based on its Port/Node WWN
select : (0..3) [1] 0
Fabric OS Command Reference
53-1000599-01