Msplcleardb - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

2

msPlClearDB

msPlClearDB
Clears the Management Server (MS) platform database on all switches in the fabric.
Synopsis msplcleardb
Description Use this command to clear the MS platform database on all switches in the fabric. Because this
operation is nonrecoverable, it should not be used unless it is intended to resolve a database
conflict between two joining fabrics or to establish an entirely new fabric with an empty database.
Notes When FCS policy is enabled, this command can be issued only from the primary FCS switch.
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands none
Examples To clear the MS platform database:
See Also msCapabilityShow, msConfigure, msPlatShow, msPlatShowDBCB, msPlMgmtActivate,
msPlMgmtDeactivate
342
switch:admin> msplcleardb
MS Platform Service is currently enabled.
This will erase MS Platform Service Database in the entire fabric.
Would you like to continue this operation? (yes, y, no, n): [no] y
Request to MS Platform DB Clear operation in progress.....
*Completed clearing MS Platform Service Database!!
Fabric OS Command Reference
53-1000599-01