Supportshowcfgdisable - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

supportShowCfgDisable

Disables a group of commands under the supportShow command.
Synopsis supportshowcfgdisable os | exception | port | fabric | services | security | network | portlog |
systemextend | filter | perfmon | ficon | iswitch | asic_db |iscsi
Description Use this command to disable a group of commands under the supportShow command. Use the
supportShowCfgEnable command to enable groups of commands. Refer to Chapter 6,
"supportShow Reference", for more information.
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operands:
os
exception
port
fabric
services
security
network
portlog
system
extend
filter
perfmon
ficon
iswitch
asic_db
iscsi
Examples To disable the OS group of commands under the supportShow command:
See Also supportShow, supportShowCfgEnable, supportShowCfgShow
Fabric OS Command Reference
53-1000599-01
Disables the OS group commands
Disables the exception group commands
Disables the port group commands
Disables the fabric group commands
Disables the service group commands
Disables the security group commands
Disables the network group commands
Disables the portlog group commands
Disables the system group commands
Disables the extend group commands
Disables the filter group commands
Disables the Performance Monitor group commands
Disables the FICON group commands
Disables the FC Router group commands
Disables the ASIC DB group commands
Disables the ISCSI group commands
switch:admin> supportshowcfgdisable os
Config update Succeeded
supportShowCfgDisable
2
615