Portstatsclear - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

2

portStatsClear

portStatsClear
Clears the hardware statistics of a specified switch port.
Synopsis portstatsclear [slotnumber/]portnumber
Description Use this command to clear the hardware statistics for a specified port.This command also clears
the hardware statistics for the associated three ports in the target port's quad, including
ALPA-based CRC monitor, End-to-End monitor, and Filter-based performance monitor statistics.
Inter-Switch Link (ISL) monitor statistics are not cleared by this command. For platforms with a
Bloom-based ASIC, the command clears the hardware statistics for all ports in the target port quad.
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operands:
slotnumber
portnumber
Examples To clear the statistics for a port:
See Also portStats64Show, portStatsShow
522
For bladed systems only, specify the slot number of the port to be cleared,
followed by a slash (/).
Specify a port number to be cleared, relative to its slot for bladed systems.
Use switchShow to display a list of valid ports.
switch:admin> portstatsclear 4/15
Fabric OS Command Reference
53-1000599-01