Portloginshow - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

2

portLoginShow

portLoginShow
Displays port login status of devices attached to the specified port.
Synopsis portloginshow [slotnumber/]portnumber
Description Use this command to display port login received from devices attached to the specified port. For
each login, this command displays the following fields:
Type
fd
fe
ff
PID
WorldWideName
credit
df_sz
cos
4
8
Further information about each login is displayed after these columns, including the Port ID of the
well-known address or N_port that was the target of the PLOGI, if applicable.
Operands This command has the following operands:
slotnumber
portnumber
Examples To display the logins received by Port 23 (in this case, revealing one FLOGI (type fe) and two
PLOGIs):
See Also fcpProbeShow, portShow
484
Type of login:
FDISC, Discover F_Port Service Parameters or Virtual N_Port login.
FLOGI, Fabric Login to Fabric F_Port.
PLOGI, Port Login to specific N-Ports or well-known addresses like Name
Server.
The 24-bit Port ID of the attached device.
The port's World Wide Name.
The credit for this login as appropriate. This is BB (buffer-to-buffer) credit for
Flogs and EE (end-to-end) credit for PLOGIs.
The default frame size for this login.
Class of Services supported. This can be a combination of the following bits:
Class 2 is supported.
Class 3 is supported.
For bladed systems only, specify the slot number of the port to be displayed,
followed by a slash (/).
Specify a port number to be displayed, relative to its slot for bladed systems.
Use switchShow to display a list of valid ports.
switch:admin> portloginshow 23
Type PID World Wide Name
=====================================================
fe 201700 21:00:00:e0:8b:05:a3:c9
ff 201700 21:00:00:e0:8b:05:a3:c9
ff 201700 21:00:00:e0:8b:05:a3:c9
credit df_sz cos
3 2048 8 scr=1
0 0 8 d_id=FFFC20
0 0 8 d_id=FFFFFC
Fabric OS Command Reference
53-1000599-01