Portcfgnport - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

portCfgNPort

Enables or disables N_Port functionality for an Access Gateway port.
Synopsis portcfgnport [port_number | port_range] | [mode]
Availability Display options - all users. Set options - admin.
Description Use this command to enable or disable N_Port functionality for an Access Gateway port. The
enabled N_Port will automatically come online if it is connected to an enterprise fabric switch that
supports NPIV.
Notes NPIV capability should be enabled on the ports connected to the Access Gateway. Use
portcfgnpivport to enable NPIV capability on the specific port. By default, NPIV is enabled on
Goldeneye.
Operands This command has the following optional operands:
port_number
port_range
mode
Examples To enable N_Port functionality for a port:
To enable N_Port functionality for a set of ports in a specific range:
To display the N_Port configuration for all the ports:
See Also portCfgShow, ag
Fabric OS Command Reference
53-1000599-01
Specifies the port to enable or disable as an N_Port.
Specifies the range of ports <port1-port2> to enable or disable as N_Port
Displays current agmode setting for the switch. The default value for mode is
0 (disabled) and if the value 1 (enabled).
switch:admin> portcfgnport 2 1
switch:admin> portcfgnport 2-3 1
switch:admin> portcfgnport
Ports
--------------------+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
Locked N_Port
or
switch:admin> portcfgshow
Ports of Slot 0 0
------------------+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
Speed AN AN AN AN
Locked N_Port ON ON ON ON
Persistent Disable.. .. .. ..
NPIV capability ON ON ON ON
0 1 2 3 4 5 6
ON ON ON ON .. .. .. .. ON ON ON ON .. .. .. .
1 2 3 4 5 6
AN AN AN AN
.. .. .. ..
.. .. .. ..
ON ON ON ON
portCfgNPort
7 8 9 10 11 12 13 14 15
7 8 9 10 11 12 13 14 15
AN AN AN AN AN AN AN AN
ON ON ON ON .. .. .. .
.. .. .. .. .. .. .. ..
ON ON ON ON ON ON ON ON
2
449