Portstats64Show - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

portStats64Show

Displays the 64-bit hardware statistics for a port.
Synopsis portstats64show [slotnumber/]portnumber
Description Use this command to display the following hardware statistics for a port. Two integers are reported
for most values. In such cases, the top word is the most significant.
stat64_wtx
stat64_wrx
stat64_ftx
stat64_frx
stat64_c2_frx
stat64_c3_frx
stat64_lc_rx
stat64_mc_rx
stat64_mc_to
stat64_mc_tx
tim64_rdy_pri
tim64_txcrd_z
er64_enc_in
er64_crc
er64_trunc
er64_toolong
er_bad_eof
er64_enc_out
er64_disc_c3
stat64_rateTxFrame
stat64_rateRxFrame
stat64_rateTxPeakFrame
stat64_rateRxPeakFrame
stat64_rateTxByte
stat64_rateRxByte
stat64_rateTxPeakByte
Fabric OS Command Reference
53-1000599-01
Number of 4-byte words transmitted.
Number of 4-byte words received.
Frames transmitted.
Frames received.
Class 2 frames received.
Class 3 frames received.
Link control frames received.
Multicast frames received.
Multicast timeouts.
Multicast frames transmitted.
Time R_RDY high priority.
Time BB_credit zero.
Encoding errors inside of frames.
Frames with CRC errors.
Frames shorter than minimum.
Frames longer than maximum.
Frames with bad end-of-frame.
Encoding error outside of frames.
Class 3 frames discarded.
Tx frame rate (fr/sec).
Rx frame rate (fr/sec).
Tx peak frame rate (fr/sec).
Rx peak frame rate (fr/sec).
Tx Byte rate (bytes/sec).
Rx Byte rate (Bytes/sec).
Tx peak Byte rate (Bytes/sec).
2
portStats64Show
519