Cfgsaveactivetodefined - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

2

cfgSaveActiveToDefined

cfgSaveActiveToDefined
Save the active (effective) zoning configuration to the defined configuration in McData Fabric
mode.
Synopsis cfgSaveActiveToDefined
Description Use this command in McData Fabric mode to move the effective zoning configuration to the
defined configuration database. If the Defined Database contains a configuration with the same
name, it will be replaced. Any non-duplicate zone sets or zones will remain unchanged.
Notes This command cannot be executed unless the Brocade switch/director is in McDATA fabric mode.
Operands The cfgSaveActiveToDefined command has no operands.
Examples Execute the cfgShow command to view defined and effective zoning configurations.
Run cfgSaveActiveToDefined to save the active (effective) zoning configuration to the defined
configuration.
See Also cfgShow, cfgSave
62
switch:admin> cfgShow
Default Zone: OFF
Safe Zone: OFF
Defined configuration:
cfg: switch set
switch1; sqitch2; switch3; switch4
zone: switch1
dd:dd:dd:dd:aa:aa:aa:aa; bb:bb:bb:cc:cc:cd:dd:dd
zone: switch2
[output truncated]
...
Effective configuration:
cfg: switch set
zone: switch1
dd:dd:dd:dd:aa:aa:aa:aa
bb:bb:bb:cc:cc:cd:dd:dd
zone: switch2 23:34:87:23:50:72:35:07
12,64
[output truncated]
switch:admin> cfgsaveactivetodefined
You are about to save the Defined zoning configuration. This
action will save the effective configuration to the defined
configuration.
Do you want the Effective zoning to become the Defined
zoning? (yes, y, no, n): [no] yes
Attempting to save new config to the defined config...
2sw0 Updating flash ...
...
[output truncated]
...
Attempting to save config to the defined config...
2sw0 Updating flash ...
Updating flash ...
23:34:87:23:50:72:35:07; 12,64
Fabric OS Command Reference
53-1000599-01