Cfgtransshow - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

cfgTransShow

Displays information about the current zoning transaction.
Synopsis cfgtransshow
Description Use this command to display the ID of the current zoning transaction. It will also give information
about whether the transaction can be aborted or not. The transaction cannot be aborted if it is an
internal zoning transaction.
Notes This command requires a Brocade Advanced Zoning license.
When FCS policy is enabled, this command can be issued only from the primary FCS switch.
Operands none
Examples To display the current transaction:
See Also cfgAdd, cfgClear, cfgCreate, cfgDelete, cfgDisable, cfgEnable, cfgRemove, cfgSave, cfgShow,
cfgTransAbort
Fabric OS Command Reference
53-1000599-01
switch:admin> cfgtransshow
There is no outstanding zone transactions
switch:admin> cfgclear
Do you really want to clear all configurations?
Clearing All zoning configurations...
switch:admin> cfgtransshow
Current transaction token is 271010736
It is abortable
cfgTransShow
(yes, y, no, n): [no] y
2
67