Ue (User Exec) Mode - Dell PowerConnect 5424 Command Line Interface Manual

UE (User EXEC) Mode

Command
clear counters
enable
exit(EXEC)
login
ping
show clock
show gvrp configuration
clear gvrp statistics
show history
show hosts
show interfaces configuration
show interfaces counters
show interfaces description
port-channel load-balance
show interfaces status
show ip igmp snooping groups Displays Multicast groups learned by IGMP snooping.
show ip igmp snooping
interface
show ip igmp snooping mrouter Displays information on dynamically learned Multicast router interfaces.
show ip interface
show lacp ethernet
show line
show ports jumbo-frame
show ports monitor
show privilege
show qos
show qos interface
show qos map
show rmon alarm
Description
Clears statistics on an interface.
Enters the privileged EXEC mode.
Closes an active terminal session by logging off the device.
Changes a login username.
Sends ICMP echo request packets to another node on the network.
Displays the time and date from the system clock.
Displays GVRP configuration information.
Displays GVRP statistics.
Lists the commands entered in the current session.
Displays the default domain name, a list of name server hosts, the static and the
cached list of host names and addresses.
Displays the configuration for all configured interfaces.
Displays traffic seen by the physical interface.
Displays the description for all configured interfaces.
Displays Port-channel information.
Displays the status for all configured interfaces.
Displays IGMP snooping configuration.
Displays the usability status of interfaces configured for IP .
Displays LACP information for Ethernet ports.
Displays line parameters.
Displays the jumbo frames configuration.
Displays the port monitoring status.
Displays the current privilege level.
Displays the QoS status.
Assigns CoS values to select one of the egress queues.
Displays all the maps for QoS.
Displays alarm configurations.
73
Command Modes