Dot1X Guest-Vlan Enable - Dell PowerConnect 5424 Command Line Interface Manual

Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
• Use the dot1x guest-vlan enable Interface Configuration command to enable unauthorized users on
an interface an access to the Guest VLAN. If the Guest VLAN is defined and enabled, the port
automatically joins the Guest VLAN when the port is unauthorized, and leaves the Guest VLAN when
the port becomes authorized. To get this functionality, the port should not be statically a member in
the Guest VLAN.
Examples
The following example
console config-if(Config-VLAN)#

dot1x guest-vlan enable

The dot1x guest-vlan enable Interface Configuration mode command enables unauthorized users on the
interface access to the Guest VLAN. Use the no form of this command to disable the access.
Syntax
• dot1x guest-vlan enable
• no dot1x guest-vlan enable
Default Configuration
Disabled.
Command Mode
Interface Configuration (Ethernet) mode.
User Guidelines
• There is one global Guest VLAN in the switch, defined by the dot1x guest-vlan interface VLAN
configuration command.
Examples
The following example enables unauthorized users on the interface access to the Guest VLAN.
console config-if(Config-VLAN)# dot1x guest-vlan enable
508
802.1x Commands