Clock Commands - Dell PowerConnect 5424 Command Line Interface Manual

show bridge address-table
count
show bridge multicast
address-table
show bridge multicast
filtering
show ports security
show ports security
addresses

Clock Commands

Command Group
clock set
clock source
clock timezone
clock summer-time
sntp authentication-key
sntp authenticate
sntp trusted-key
sntp client poll timer
sntp broadcast client enable
sntp anycast client enable
sntp client enable
(interface)
Displays the number of addresses present in all or at a
specific VLAN.
Displays statically created entries in the bridge-
forwarding database.
Displays the Multicast filtering configuration.
Displays the port-lock status.
Displays the current dynamic addresses in locked ports.
Description
Manually sets the system clock.
Configures an external time source for the system
clock.
Sets the time zone for display purposes.
Configures the system to automatically switch to
summer time (daylight saving time).
Defines an authentication key for Simple Network
Time Protocol (SNTP).
Grants authentication for received Network Time
Protocol (NTP) traffic from servers.
Authenticates the identity of a system to which
SNTP will synchronize.
Sets the polling time for the SNTP client.
Enables the SNTP Broadcast clients.
Enables Anycast clients.
Enables the SNTP client on an interface.
Privileged User
EXEC
Privileged User
EXEC
Privileged User
EXEC
Privileged User
EXEC
Privileged User
EXEC
Access Mode
Privileged User
EXEC
Privileged User
EXEC
Global
Configuration
Global
Configuration
Global
Configuration
Global
Configuration
Global
Configuration
Global
Configuration
Global
Configuration
Global
Configuration
Interface
Configuration
Command Groups
37