Snmp-Server Trap Authentication; Snmp-Server Host - Dell PowerConnect 5424 Command Line Interface Manual

Examples
The following example displays the command to enable SNMP traps.
Console (config)# snmp-server enable traps

snmp-server trap authentication

The snmp-server trap authentication Global Configuration mode command enables the switch to send
Simple Network Management Protocol traps when authentication fails. Use the no form of this
command to disable SNMP authentication failed traps.
Syntax
• snmp-server trap authentication
• no snmp-server trap authentication
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode.
User Guidelines
• There are no user guidelines for this command.
Examples
The following example displays the command to enable authentication failed SNMP traps.
Console (config)# snmp-server trap authentication

snmp-server host

The snmp-server host Global Configuration mode command specifies the recipient of Simple Network
Management Protocol notification operation. Use the no form of this command to remove the specified
host.
332
SNMP Commands