Ipv6 Mld Version - Dell PowerConnect 5424 Command Line Interface Manual

Syntax
• ipv6 mld join-group group-address
• no ipv6 mld join-group group-address
• group-address — The multicast group IPv6 address.
Default Configuration
This command has no default setting.
Command Mode
Interface configuration (Ethernet, VLAN, Port-channel).
User Guidelines
• The ipv6 mld join-group command configures MLD reporting for a specified group. The packets that
are addressed to a specified group address will be passed up to the client process in the device.
Example
The following example configures MLD reporting for specific groups.
Console(config-if)# ipv6 mld join-group ff02::10

ipv6 mld version

The ipv6 mld version interface configuration command changes the Multicast Listener Discovery
Protocol (MLD) version. To change to the default version, use the no form of this command.
Syntax
• ipv6 mld version {1 | 2}
• no ipv6 mld version
– 1 — Specifies MLD version 1.
– 2 — Specifies MLD version 2.
Default Configuration
MLD version 2.
Command Mode
Interface configuration (Ethernet, VLAN, Port-channel).
User Guidelines
• There are no user guidelines for this command.
224
IP Addressing Commands