Ip Dhcp Snooping Verify - Dell PowerConnect 5424 Command Line Interface Manual

Syntax
• ip dhcp snooping information option allowed-untrusted
• no ip dhcp snooping information option allowed-untrusted
Default Configuration
Discard DHCP packets with option-82 information from an untrusted port.
Command Mode
Global Configuration mode.
User Guidelines
• There are no user guidelines for this command.
Example
The following example configures a switch to accept DHCP packets with option-82 information from an
untrusted port.
console (config)#ip dhcp snooping information option allowed-untrusted

ip dhcp snooping verify

The ip dhcp snooping verify Global Configuration mode command configures the switch to verify on an
untrusted port that the DHCP packet source MAC address matches the client hardware address. Use the
no form of this command to configure the switch to not verify the MAC addresses.
Syntax
• ip dhcp snooping verify
• no ip dhcp snooping verify
Default Configuration
The switch verifies the source MAC address in a DHCP packet that is received on untrusted ports
matches the client hardware address in the packet.
Command Mode
Global Configuration mode.
User Guidelines
• There are no user guidelines for this command.
181
DHCP Snooping