Exit(Exec); End - Dell PowerConnect 5424 Command Line Interface Manual

Example
The following example changes the configuration mode from Interface Configuration mode to User
EXEC mode.
Console(config-if)# exit
Console(config)# exit
Console#

exit(EXEC)

The exit User EXEC mode command closes an active terminal session by logging off the device.
Syntax
• exit
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode .
User Guidelines
• There are no user guidelines for this command.
Example
The following example closes an active terminal session.
Console> exit

end

The end Global Configuration mode command ends the current configuration session and returns to the
privileged command mode.
Syntax
• end
Default Configuration
This command has no default configuration.
444
User Interface