Set Enable-Password Active; Show Passwords Configuration - Dell PowerConnect 5424 Command Line Interface Manual

Command Mode
Privileged EXEC mode.
Example
The following example reactivates a locked out telnet line.
Console# set line telnet active

set enable-password active

The set enable-password active Privileged EXEC mode command reactivates a locked out local
password.
Syntax
• set enable-password level active
• level — The level for which the password applies. (Range 1 - 15)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
Example
The following example reactivates a previously locked out local password at level 3.
Console# set enable-password 3 active

show passwords configuration

The show passwords configuration Privileged EXEC mode command displays information about the
passwords management configuration.
Syntax
• show passwords configuration
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
429
TIC Commands