Dell PowerConnect 5424 Command Line Interface Manual page 69

mdix
name
negotiation
port monitor
port security
port security routed secure-
address
port storm-control broadcast
enable
port storm-control broadcast rate Configures the maximum Broadcast rate.
qos cos
qos trust (Interface)
rmon collection history
shutdown
sntp client enable (interface)
spanning-tree cost
spanning-tree disable
spanning-tree link-type
spanning-tree portfast
spanning-tree port-priority
speed
system flowcontrol
tunnel isatap router
tunnel mode ipv6ip
tunnel source
qos map dscp-queue
wrr-queue bandwidth
Enables automatic crossover on a given interface.
Configures a name to a VLAN.
Enables auto-negotiation operation for the speed and duplex parameters of a
given interface.
Starts a port monitoring session.
Disables new address learning on an interface.
Adds MAC-layer secure addresses to a routed port.
Enables Broadcast storm control.
Configures the default port CoS value.
Enables each port trust state while the system is in basic mode.
Enables a Remote Monitoring (RMON) MIB history statistics group on an
interface.
Disables interfaces.
Enables the Simple Network Time Protocol (SNTP) client on an interface.
Configures the spanning tree path cost for a port.
Disables spanning tree on a specific port.
Overrides the default link-type setting.
Enables PortFast mode.
Configures port priority.
Configures the speed of a given ethernet interface when not using auto-
negotiation.
Enables flow control on cascade ports.
Configures a global string that represents a specific automatic tunnel router
domain name.
Configures an IPv6 transition mechanism global support mode.
Sets the local (source) tunnel interface IPv4 address.
Defines the wrr-queue mechanism on an egress queue.
Assigns Weighted Round Robin (WRR) weights to egress queues.
69
Command Modes