Dell PowerConnect 5424 Command Line Interface Manual page 40

description
speed
duplex
negotiation
flowcontrol
system flowcontrol
mdix
back-pressure
port jumbo-frame
clear counters
set interface active
show interfaces
configuration
show interfaces status
show interfaces description Displays the description for all configured interfaces.
show interfaces counters
show ports jumbo-frame
port storm-control include-
multicast
port storm-control
broadcast enable
port storm-control
broadcast rate
show ports storm-control
show system flowcontrol
40
Command Groups
Adds a description to an interface.
Configures the speed of a given Ethernet interface
when not using auto-negotiation.
Configures the full/half duplex operation of a given
Ethernet interface when not using auto-negotiation.
Enables auto-negotiation operation for the speed and
duplex parameters of a given interface.
Configures the Flow Control on a given interface.
Enables flow control on cascade ports.
Enables automatic crossover on a given interface.
Enables Back Pressure on a given interface.
Enables jumbo frames for the device.
Clears statistics on an interface.
Reactivates an interface that was suspended by the
system.
Displays the configuration for all configured
interfaces.
Displays the status for all configured interfaces.
Displays traffic seen by the physical interface.
Displays the jumbo frames configuration.
Enables the device to count Multicast packets.
Enables Broadcast storm control.
Configures the maximum Broadcast rate.
Displays the storm control configuration.
Displays the flow control state on cascade ports.
Interface
Configuration
Interface
Configuration
Interface
Configuration
Interface
Configuration
Interface
Configuration
Interface
Configuration
Interface
Configuration
Interface
Configuration
Global
Configuration
User EXEC
Privileged User
EXEC
User EXEC
User EXEC
User EXEC
User EXEC
User EXEC
Global
Configuration
Interface
Configuration
Interface
Configuration
Privileged User
EXEC
Privileged User
EXEC