Command Mode
Global Configuration mode.
User Guidelines
•
There are no user guidelines for this command.
Example
The following example sets a local level 15 password "secret" to control access to user and privilege levels.
Console (config)# enable password level 15 secret
username
The username Global Configuration mode command establishes a username-based authentication
system. Use the no form of this command to remove a user name.
Syntax
•
username name [password password] [level level] [encrypted]
•
no username name
•
name — The name of the user. (Range: 1 - 20 characters)
•
password — The authentication password for the user. (Range: 8 - 64 characters)
•
level — The user level. (Range: 1 -15)
•
encrypted — Encrypted password entered, copied from another device configuration.
Default Configuration
No user is defined.
Command Mode
Global Configuration mode.
User Guidelines
•
No password is required.
Example
The following example configures user "bob" with the password "lee" and user level 15 to the system.
Console (config)# username bob password lee level 15
93
AAA Commands