Command Mode
Global Configuration mode.
User Guidelines
•
There are no user guidelines for this command.
Example
The following example configures Voice vlan aging-timeout.
Console (config)# voice vlan aging-timeout minutes
voice vlan enable
The voice vlan enable Interface Configuration mode command enables automatic Voice VLAN
configuration for a port. Use the no form of this command to disable automatic Voice VLAN
configuration.
Syntax
•
voice vlan enable
•
no voice vlan enable
Default Configuration
Automatic Voice VLAN configuration disabled.
Command Mode
Interface Configuration (Ethernet, port-channel) mode.
User Guidelines
•
The port is added to the Voice VLAN when a packet with a source MAC address that is a telephony
MAC address (defined by the Voice VLAN OUI-table Global Configuration command) is trapped on
the port.
NOTE:
The packet VLAN ID can be the Voice VLAN ID, or any other VLAN. The port joins the Voice VLAN as a
tagged port. If the time since the last MAC address with telephony MAC address has aged out, exceeds the timeout
limit (configured by the Voice VLAN aging-timeout Global Configuration command), the port is removed from the
Voice VLAN.
Example
The following example enables automatic Voice VLAN configuration for a port.
Console (config)#voice vlan enable
472
Voice VLAN