User Guidelines
•
The command is relevant only in port security max-addresses mode.
Example
In this example, port security mode is set to dynamic for Ethernet interface g7.
Console(config)# interface ethernet g7
Console(config-if)# port security mode mac-addresses
port security routed secure-address
The port security routed secure-address Interface Configuration mode command adds MAC-layer secure
addresses to a routed port. Use the no form of this command to delete the MAC addresses.
Syntax
•
port security routed secure-address mac-address
•
no port security routed secure-address mac-address
•
mac-address — Specify a MAC address in the format of xx:xx:xx:xx:xx:xx.
Default Configuration
No addresses are defined.
Command Mode
Interface Configuration (Ethernet, port-channel). Cannot be configured for a range of interfaces
(range context).
User Guidelines
•
The command enables adding secure MAC addresses to a routed ports in port security mode.
The command is available when the port is a routed port and in port security mode. The address is
deleted if the port exits the security mode or is not a routed port.
Example
In this example, the MAC-layer address 66:66:66:66:66:66 is added to port g1.
Console (config)# interface ethernet g1
Console (config-if)# port security routed secure-address
66:66:66:66:66:66
Address Table Commands
105