Ip Https Exec-Timeout - Dell PowerConnect 5424 Command Line Interface Manual

Command Mode
Global Configuration mode.
User Guidelines
• There are no user guidelines for this command.
Example
The following example configures the https port number to 100.
Console (config)# ip https port 100

ip https exec-timeout

The ip https exec-timeout Global Configuration mode command sets the interval the system waits for
user input before automatically loging off. Use the no form of this command to return to default.
Syntax
• ip https exec-timeout minutes [seconds]
• no ip https exec-timeout
Parameters
• minutes — Integer that specifies the number of minutes. (Range: 0 - 65535)
• seconds — Additional time intervals in seconds. (Range: 0 - 59)
Default Configuration
The default configuration is the exec-timeout that was set by the ip http exec-timeout command.
Command Mode
Global Configuration mode.
User Guidelines
• This command also configures the exec-timeout for HTTPS in case the the HTTPS timeout was not
set.To specify no timeout, enter the command ip https exec-timeout 0 0.
Example
The following example the interval the system waits for user input before automatically loging off to
3 minutes 30 seconds.
Console (config)# ip https exec-timeout 3 30
480
Web Server