Default Configuration
There is no default configuration for this command.
Command Modes
Privileged EXEC mode.
User Guidelines
•
There are no user guidelines for this command.
Example
The following example displays the configuration of filters use the show snmp filters Privileged EXEC
command.
Console # show snmp filters
Name
user-filter
user-filter
user-filter
show snmp users
To display the configuration of groups use the show snmp users Privileged EXEC command.
Syntax
•
show snmp users [username]
•
usernam — The name of the user. Range: Up to 30 character
Default Configuration
There is no default configuration for this command.
Command Modes
Privileged EXEC mode.
User Guidelines
•
There are no user guidelines for this command.
OID Tree
1.3.6.1.2.1.1
1.3.6.1.2.1.1.7
1.3.6.1.2.1.2.2.1.*.1 Included
Type
Included
Excluded
SNMP Commands
345