Attaching Patches Or Emblems To Shirt Sleeves; Zigzag Stitch; Stitch - Brother NQ3600D Operation Manual

Attaching Patches or Emblems to Shirt Sleeves

Use these stitch patterns to attach patches or emblems to
pant legs, shirt sleeves, etc.
• Using the table below, refer to "Using the utility
stitch tables in the "Sewing" section" in the "Basic
operations" section.
Stitch name

Stitch

Reverse
(Straight stitch)
Sideways to left
(Straight stitch)
Sideways to right
(Straight stitch)
Forward
(Straight stitch)
Sideways to left

(Zigzag stitch)

Sideways to right
(Zigzag stitch)
Forward
(Zigzag stitch)
Reverse
(Zigzag stitch)
Insert the tubular piece of fabric onto the free-arm, and then
sew in the order shown in the illustration.
4
3
2
Remove the flat bed attachment.
a
Attach monogramming foot "N".
b
c Select stitch .
Stitch number
5-01 92 —
5-02 93 —
5-03 94 —
5-04 95 —
N
5-05 96 —
5-06 97 —
5-07 98 —
5-08 99 —
1
Attaching Patches or Emblems to Shirt Sleeves
d Lower the needle into the fabric at the beginning of the
stitching, and then start sewing.
Lower the needle at the upper-right corner.
 The fabric is fed toward the back of the machine, as
usual.
e After you have sewn to the corner, stop the machine,
and then select stitch
f Start sewing.
 The fabric is fed to the right.
g After you have sewn to the corner, stop the machine,
and then select stitch
h Start sewing.
 The fabric is fed forward.
i After you have sewn to the corner, stop the machine,
and then select stitch
j Start sewing.
 The fabric is fed to the left.
.
.
.
Sewing S-39
S