Embroidering A Quilting Pattern Across The Entire Fabric (Edge-To-Edge Quilt Function); Creating Edge-To-Edge Quilt Data - Brother Upgrade KIT III Operation Manual

EMBROIDERY
f
Touch and then touch
enlarged image of the finished embroidery.
* After deselecting a region, check the image to be
sure no previously hidden stitches are visible.
Memo
• When a pattern with the deselect region
setting applied is saved, the deselect region
setting is also saved. However, the pattern
cannot be saved if the deselect region setting
is applied to all thread colors.
• The parts with the deselect region setting
applied are merely not displayed; they are not
deleted. The embroidering area required to
embroider the pattern is the same as for the
original pattern.
11
to check an
Embroidering a Quilting Pattern
Across the Entire Fabric (Edge-to-
Edge Quilt Function)
Connect quilting patterns to embroider from edge
to edge of a specified area. By rehooping a large
piece of fabric, you can continue embroidering the
quilting pattern across the entire fabric.

■ Creating Edge-to-Edge Quilt Data

a
Determine the area of the fabric to be
embroidered, and then draw a line around
it with a chalk pencil. Measure the width
and height.
a Embroidering area
• Make sure that the chalk pencil line is within
b
Touch
a
Note
the embroidering area when the fabric is
hooped.
, and then touch .