Creating Double Stitch - Brother BAS-761 Instruction Manual

Creating double stitch

Command to be used
2 M
M
7 8 9 L
1 1 1 E
If sharp angles or fine curves are included in the pattern sheet, the desired double stitch may
not be achieved.
1. Select the sewing start position with
2. Determine the width, then input
To change the stitch length, input it after this procedure.
Displays the number of the command input.
3. Move the needle with
4. Move the needle to the corner point, then input
Displays the number of the command input.
Chapter 3 Programming with Command Function
Creating double stitch in the reverse direction to the sewing
path. Input the width of double stitch in
Values 0.0 - 9.9 mm are available for the width.
Example Width
1.5 mm
Input the stitch length in
Input the point to be a corner.
Carrying out double stitch on the left side to the sewing path.
Starting double stitch calculations.
2
to select the second point, then press
Programmer
.
Input
215
.
, then press
.
M
7 8 9 L
L .
.
L
.
107