Table of Contents
Advertisement
Hardware Installations and Upgrades
9. (SCSI installation only): Connect the end of the SCSI cable that is labeled "Backplane" to the
backplane SCSI Connector. See letter "A" in the figure below.
10. (SCSI installation only): Connect the end of the SCSI cable that is labeled "Server Board" to
the SCSI connection on the server board if not already connected. See letter "B" in the figure
below. See your server board documentation to locate the SCSI connection point on the server
board.
11. (Optional) Install the front bezel. For instructions, see
Intel® Server Chassis SR2400/SR2400DC User Guide
B
Figure 30. Connecting the SCSI Data Cable
A
TP01075
"Installing the Front Bezel."
35
Advertisement
Table of Contents
