Figure 7. Backplane Power Cable And Sas/Sata Data Cable Attachments; Figure 8. On-Board Mini-Sas Hd Connectors For Embedded Sata Support - Intel R1000WF System Integration And Service Manual

Intel ® Server System R1000WF Product Family System Integration and Service Guide
2. Connect Backplane SAS/SATA Data and Power Cables
a) Locate the SAS/SATA Data cable.
b) Attach the P1 (Straight Connector) end of the SAS/SATA Data cable to the specified mini-SAS HD
connector on the backplane (see Figure 7).
c) Route the SAS/SATA Data cable along the base of the backplane and underneath the backplane
power connector before bending the cable up along the right chassis sidewall towards the back of
the system.

Figure 7. Backplane Power Cable and SAS/SATA Data Cable Attachments

d) For on-board SATA support, attach the P2 (angled connector) end of the SAS/SATA data cable to
one of the on-board Mini-SAS HD connectors (see following illustration), or to any available
SAS/SAS RAID add-in option.
SATA ports 0 - 3

Figure 8. On-Board Mini-SAS HD Connectors for embedded SATA Support

6
Figure 6. SAS/SATA I/O Cable