Removing A Floppy Drive From The Slimline Bay (No Backplane Installed) - Intel SR2400SYS - Server Platform - 0 MB RAM User Manual

17. Install the chassis cover. For instructions, see
18. Remove the front bezel. For instructions, see
19. Plug in all peripheral devices and connect the AC power cable or DC external source to the
server.
Removing a Floppy Drive from the Slimline Bay (No Backplane
Installed)
1. Observe the safety and ESD precautions at the beginning of this book. See
Information."
2. Power down the server and unplug all peripheral devices and the AC power cable or DC
external source.
3. Remove the chassis cover. For instructions, see
4. Remove the front bezel if it is installed. For instructions, see
5. Detach the power and data cables from the rear of the floppy drive.
6. Detach the data cable from the server board and remove the cable from the chassis. Remove the
data cable from the chassis. You may need to remove the air baffle to remove the data cable.
For instructions on removing and installing the air baffle, see
Baffle (No Backplane
Installed)."
7. Push in on the blue lever at the rear of the drive carrier.
8. Slide the floppy drive carrier out through the front of the chassis.
9. Remove the screw that attaches the interposer board to the drive. Lift the interposer board from
the drive.
10. Press downward on the side of the carrier to release the drive from the drive carrier.
11. Store the floppy drive carrier, the interposer board, and the floppy drive data cable for future
use.
12. Install the slimline filler panel into the chassis opening.
13. Install the chassis cover. For instructions, see
14. (Optional) Install the front bezel. For instructions, see
Bezel."
15. Plug in all peripheral devices and connect the AC power cable or DC external source to the
server.
52
"Installing the Chassis Cover."
"Installing the Front Bezel."
Installed)" and "Installing the Fixed Drive Air Baffle (No Backplane
"Installing the Chassis
"Removing the Chassis Cover."
"Removing the Front
"Removing the Fixed Drive Air
Cover."
"Removing and Installing the Front
"Safety
Bezel."