Removing And Installing The Chassis Cover; Removing The Chassis Cover; Figure 9. Removing The Chassis Cover - Intel SR2400SYS - Server Platform - 0 MB RAM User Manual

Removing and Installing the Chassis Cover

Removing the Chassis Cover

The Intel® Server Chassis SR2400/SR2400DC must be operated with the top cover in place to
ensure proper cooling. You will need to remove the top cover to add or replace components inside
of the chassis. Before removing the top cover, power down the server and unplug all peripheral
devices and the AC power cable or DC external source. Except for the redundant power supply,
none of the components inside the chassis are hot-swappable.
NOTE
A nonskid surface or a stop behind the chassis may be needed to prevent the
chassis from sliding on your work surface.
1. Observe the safety and ESD precautions at the beginning of this book. See
Information."
2. Turn off all peripheral devices connected to the server. Turn off the server.
3. Disconnect the AC power cord or DC external source.
4. Remove the shipping screw (if installed). See letter "A" in the figure below.
5. While holding in the blue button at the top of the chassis in (see letter "B"), slide the top cover
back until it stops (see letter "C").
6. Lift the cover upward and remove it. A notch in the cover is provided to help lift it upward to
remove it (see letter "D").
14
B
D

Figure 9. Removing the Chassis Cover

"Safety
C
A
TP01092