Figure 43. Connecting The Flat Flex Cable To A Floppy Drive - Intel SR2400SYS - Server Platform - 0 MB RAM User Manual

Hardware Installations and Upgrades
7. Open the connector on the rear of the floppy drive by pulling up on the connector cover. See
letter "A" in the figure below.
8. Insert one end of the 26-pin flat flex cable end into the connector. See letter "B" in the figure.
9. Push down on the connector cover to lock the cable into place. See letter "C" in the figure.
10. Open the connector on the interposer board by pulling out on the connector cover. See letter
"D" in the figure below.
11. Insert the loose end of the floppy cable into the interposer board connector. See letter "E" in the
figure.
12. Push in on the connector cover to lock the cable into place. See letter "F" in the figure.

Figure 43. Connecting the Flat Flex Cable to a Floppy Drive

Intel® Server Chassis SR2400/SR2400DC User Guide 49