Installing A Pci Riser Connector; Figure 59. Installing A Pci Riser Connector - Intel SR2400SYS - Server Platform - 0 MB RAM User Manual

Hardware Installations and Upgrades

Installing a PCI Riser Connector

1. Observe the safety and ESD precautions at the beginning of this book. See
Information."
2. Power down the server and unplug all peripheral devices and the AC power cable or DC
external source.
3. Remove the chassis cover. For instructions, see
4. Remove processor air duct. For instructions, see
5. Remove the PCI riser assembly. For instructions, see
6. Line up the screws on the riser assembly with the slot and the large hole on the riser connector.
7. Press and hold the blue riser locking lever. See letter "A" in the figure below.
8. Place riser connector onto the retention pins.
9. Slide the riser connector toward the front of the riser module to lock it into place. See letter "B"
in the figure.
10. Release the blue locking lever.
11. Install the PCI add-in card(s), if desired. For instructions, see
12. Install the PCI riser assembly into the chassis. For instructions, see
Assembly."
13. Install the processor air duct. For instructions, see
14. Install the chassis cover. For instructions, see
Intel® Server Chassis SR2400/SR2400DC User Guide

Figure 59. Installing a PCI Riser Connector

"Installing the Chassis
"Removing the Chassis Cover."
"Removing the Processor Air
"Removing the PCI Riser
A
TP01313
"Installing a PCI Add-in
"Installing the PCI Riser
"Installing the Processor Air
Cover."
"Safety
Duct."
Assembly."
B
Card."
Duct."
67