Hardware Installations and Upgrades
10. (Fixed SATA system only): Disconnect the SATA power adapter cable from the power supply.
In the figure below, letter "B" is the connector from the power supply. Letter "A" is the
connector from the SATA power adapter cable.
11. Press the bar at the front of power distribution module to release the module (see "A" in the
following figure). Slide the module forward slightly and lift it from the chassis (see "B" and
"C").
Intel® Server Chassis SR2400/SR2400DC User Guide
B
A
Figure 66. Disconnecting the Flex and Power Cables
C
A
A
* Air baffle not shown for illustrative purposes.
Figure 67. Removing the Power Distribution Module
TP01351
B
TP01352
75