Installing The Small Hot-Swap Air Baffle (Backplane Installed); Figure 19. Installing The Small Hot-Swap Air Baffle - Intel SR2400SYS - Server Platform - 0 MB RAM User Manual

Hardware Installations and Upgrades

Installing the Small Hot-swap Air Baffle (Backplane Installed)

1. Observe the safety and ESD precautions at the beginning of this book. See
Information."
2. Power down the server and unplug all peripheral devices and the AC power cable or DC
external source.
3. Remove the chassis cover. For instructions, see
4. Remove the fan module. For instructions, see
5. Remove the backplane. For instructions, see
6. Lower the small baffle into the chassis behind the drive bay area, using your notes from the air
baffle removal steps to re-route any cables.
7. Insert the two hooks on the baffle into the matching slots at the rear of the drive area. See letter
"A" in the figure below.
8. Install the backplane. For instructions, see
Backplane."
9. Install the fan module. For instructions, see
10. Return to the procedure that directed you to install the small air baffle.
Intel® Server Chassis SR2400/SR2400DC User Guide

Figure 19. Installing the Small Hot-swap Air Baffle

"Installing a Replacement SATA or SCSI
"Removing the Chassis
"Removing the Fan Module."
"Removing a SATA or SCSI
"Installing the Fan Module."
"Safety
Cover."
Backplane."
25