Table of Contents
Advertisement
6. Lift up on the two levers on the PCI riser assembly to lift the riser assembly from the chassis.
See the figure below.
7. If you need to add or replace a PCI riser connector, see
Connector."
8. If you need to add or replace a PCI add-in card, see
Card."
9. If you removed the PCI riser assembly as a step for another procedure, continue with that
procedure.
Figure 56. Removing the PCI Riser Assembly from the Chassis
Installing the PCI Riser Assembly
Use the following instructions to install the PCI riser assembly into the chassis.
1. Observe the safety and ESD precautions at the beginning of this book. See
Information."
2. Power down the server and unplug all peripheral devices and the AC power cable or DC
external source.
3. Remove the chassis cover. For instructions, see
4. Remove the processor air duct. For instructions, see
5. Install any necessary add-in cards into the PCI riser assembly.
6. Install any cables onto add in cards that require them. See your add-in card documentation for
information and add-in card requirements.
64
"Installing and Removing a PCI Riser
"Installing and Removing a PCI Add-in
"Removing the Chassis Cover."
"Removing the Processor Air
"Safety
Duct"
Advertisement
Table of Contents
