Legal Notices The information in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
HP-PB Token Ring Release Notes for HP-UX 11.0 The following information is for HP-PB Token Ring LAN adapters on HP-UX version 11.00. What’s in this Version The following describes the HP-PB Token Ring products for the K-class, T-class, and series 800 servers.
HP-PB Token Ring Release Notes for HP-UX 11.0 Known Problems and Workarounds Known Problems and Workarounds None Compatibility Information and Installation Requirements Software Requirements • HP-UX 11.0 operating system Hardware Requirements • K-class, T-class, or series 800 servers • CD-ROM drive Memory and Disk Space Requirements •...
Page 7
HP-PB Token Ring Release Notes for HP-UX 11.0 Patches and Fixes for this Version (B.11.00.07) Patches and Fixes for this Version (B.11.00.07) Fix: • The HP-PB Token Ring driver panics during reset state. The HP-PB Token Ring driver tries to handle control command completion interrupts during reset state and hence it panics.
Page 8
HP-PB Token Ring Release Notes for HP-UX 11.0 Patches and Fixes for this Version (B.11.00.07) The fix is to perform the range check before accessing the data structure, therefore preventing memory corruption and subsequent panic. Patch PHNE_17355: • The card can go into a hung state and an error message will be logged in the ‘/var/adm/syslog/syslog.log’...
Page 9
HP-PB Token Ring Release Notes for HP-UX 11.0 Patches and Fixes for this Version (B.11.00.07) The driver now marks the “Operational Status” as “UP” when driver initialization is successfully completed. • When the HP-PB Token Ring card is used with a Token ring card supporting 4500 MTU size, the network may hang.
Need help?
Do you have a question about the Integrity BL860c and is the answer not in the manual?
Questions and answers