Juniper MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual page 100

CHAPTER 5 CLI Commands
Configure IP addresses.
ip
Schedule jobs for the future or execute on demand.
job
Activate features using license keys.
license
Configure event logging.
logging
no Negate or clear certain configuration options.
and
ntp ntpdate
EXEC. Send ICMP echo requests to a specified host.
ping
radius-server
Reboot or shut down the system.
reload
Reset the system to its factory state.
reset
service-director
Media Flow Controller physically closest to the client.
Display system configuration or statistics; applies to most commands, e.g. show files
show
lists available files or displays their content, if the file is specified. Includes special
subcommands. Many are
EXEC. Log into another system securely using SSH.
slogin
snmp-server
Configure SSH (secure shell) settings.
ssh
Configure statistics and alarms.
stats
tacacs-server
tcpdump
EXEC. Log into another system using telnet.
telnet
telnet-server
EXEC. Set terminal options. See
terminal
traceroute
username
Configure the Web-based management console.
web
Save the running configuration to persistent storage.
write
100
Configure NTP (Network Time Protocol) servers and system clock.
Configure RADIUS server settings.
Manage the Service Director feature that lets you auto-direct traffic to the
EXEC
Configure SNMP (simple network management protocol) server options.
Configure TACACS+ server settings.
Display packets on a network.
Enable/disable the TELNET server.
EXEC. Trace the route packets take to a destination.
Configure user accounts and set capabilities.
Media Flow Manager Administrator's Guide
commands.
"CLI Options" on page 96.
Copyright © 2010, Juniper Networks, Inc.