Table of Contents
Advertisement
CHAPTER 5 CLI Commands
CHAPTER 5
CLI Commands
This is a list of all commands, with brief descriptions. Click a name to jump to that topic.
Certain commands only appear if you are in one of the three command modes. See
Note!
"CLI Options" on page 96
EXEC
commands.
(authentication, authorization, accounting). Set authentication and authorization.
aaa
(address resolution protocol). Set ARP servers.
arp
Manage Web banners.
banner
Configure system booting.
boot
EXEC. Clear the arp cache.
clear
cli Information on command modes, and CLI options; see
Set the system date and time.
clock
Configure and/or use appliance, authorization (auth), cancel, execute, group, profile,
cmc
rendezvous, server, and status for Central Management Console on a Media Flow Manager
server.
configuration
configure
Configure cryptographic settings.
crypto
Generate a "dump" of the system debugging utility.
debug
Configure email and event notification via email.
email
Go to Enable mode for additional commands; disallowed for unpriv users.
enable
Leave Configuration mode, or close the CLI window if in Standard mode.
exit
Manipulate stats, and tcpdump reports.
file
ftp-server. Configure FTP settings.
help View the interactive help system.
hostname
Manage software images.
image
interface
Copyright © 2010, Juniper Networks, Inc.
for details. Commands that do not require being in a mode are
Manipulate configuration files.
Go to Configuration mode for additional commands; disallowed for unpriv users.
Set the system's hostname.
Configure network interfaces.
Media Flow Manager Administrator's Guide
"CLI Options" on page
96.
99
Advertisement
Table of Contents
