Stats Samples; Tacacs-Server - Juniper MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Administrator’s guide and cli command reference
Table of Contents

Advertisement

Media Flow Manager Administrator's Guide
Table 7
Stats CHDs (continued from previous page)
Stat CHD
fs_mnt_month
fs_mnt_week
intf_day
intf_hour
intf_util
memory_day
memory_pct
mfds_tx_bw
paging
paging_day

stats samples

The options for stats sample ID are shown in
bold.
Table 8
Stats Samples
Stat Sample
cmc_status
cpu_util
disk_io
fs_mnt_bytes
fs_mnt_inodes
interface
intf_util
memory
paging

tacacs-server

TACACS+ (Terminal Access Controller Access-Control System Plus) is a protocol that
provides access control for routers, network access servers and other networked computing
devices via one or more centralized servers. TACACS+ provides separate authentication,
Filesystem usage for that month: bytes. Default interval and range are 7200
seconds.
Filesystem usage for that week: bytes. Default interval and range are 1800
seconds.
Network interface statistics aggregation: bytes. Default interval and range are 300
seconds.
Network interface statistics by hour. Default interval and range are 30 seconds.
Aggregate network utilization across all interfaces.
Average physical memory usage: bytes. Default interval and range are 1800 seconds.
Average physical memory usage.
Transmissions out (TX) bandwidth of managed Media Flow Controllers is too high.
Average paging activity (page faults). Default interval is 20 seconds, default range
is 300 seconds.
Paging activity (page faults) by day. Default interval and range are 1800 seconds.
CMC status checking
CPU utilization: milliseconds of time spent; default = 15 seconds.
Disk I/O (input/output, in kilobytes); default = 15 seconds.
Filesystem usage, in bytes; default = 1 minute.
Filesystem usage, in inodes; default = 1 minute.
Network interface statistics; default = 30 seconds.
Network interface utilization, in bytes; default = 5 seconds.
System memory utilization, in bytes; default = 20 seconds.
Paging activity: page faults; default = 20 seconds.
CHAPTER 5 CLI Commands
Description
Table
8; sampling interval defaults shown in
Description
tacacs-server
145

Advertisement

Table of Contents
loading

Table of Contents