Table of Contents
Advertisement
Media Flow Manager Administrator's Guide
CMC Setup > Rendezvous
Rendezvous is the mechanism by which Media Flow Controllers connect to a CMC for
management. This page lets you set parameters for Media Flow Controllers to connect
automatically. See
The CMC Setup > Rendezvous page lets you tell CMC to accept clients who request
management. In order for this option to work, you must enable CMC rendezvous on the client
(managed node or node-to-be-managed) first. This can be included in a Profile you create.
For Media Flow Controller details, see
Options" on page 70
Reference.
1. Once your nodes have been configured to rendezvous with your CMC server, enable
automatic rendezvous by selecting the Accept new clients automatically checkbox and
clicking Apply. All appliances that have been configured to rendezvous with this CMC
server display in the Rendezvous Requests Pending table.
2. Use the buttons to act on the pending rendezvous requests:
•
Refresh Listing—Update the display with latest information.
•
Accept Selected—The selected pending rendezvous are accepted and cleared from
the pending list.
•
Accept All—All pending rendezvous are accepted and the list is cleared.
•
Reject Selected—Pending rendezvous are rejected and cleared from the list.
•
Reject All—All pending rendezvous are rejected and the list is cleared.
3.
Click Save at the top of the page to make changes persistent across reboots.
Figure 62
CMC Setup > Rendezvous Page Detail
Figure
62, next, for graphic.
of the Media Flow Controller Administrator's Guide and CLI Command
CHAPTER 3 Media Flow Manager Web-Based Interface
"Configuring CMC (Central Management Console)
CMC Setup
73
Advertisement
Table of Contents
