Reload - Juniper MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

CHAPTER 5 CLI Commands
Notes:
•
—Configure hosts to receive RADIUS authentication requests; overrides the set
host
global defaults for all RADIUS hosts. Use no radius host <IP_address> to delete all
RADIUS-specific settings for this host. To refine which host is deleted, use no radius
host <IP_address> auth-port <port>. RADIUS hosts are tried in the order they are set.
•
auth-port
address in more than one radius host as long as the auth-port for each is different. A
UDP port number, specify auth-port immediately after the host option (if present).
•
key | prompt-key
or choose prompt-key and the user is prompted for the key; entries echo the asterisk
(*) character, for greater security. If no key is set, the user is prompted for the key.
Mutually exclusive with prompt-key argument.
•
login-lat-group
groups that the user is authorized to use when Login-service is defined as LAT (local
area transport). If none is set, the user is prompted for the string; entries echo the
asterisk (*) character, and the user must enter the same string.
•
retransmit
client attempts to authenticate with any RADIUS server. Range is 0-5, default is 1. To
disable retransmissions set it to 0 (zero).
•
timeout
request to any RADIUS server. Range is 1-60, default is 3.
•
—Set or clear (with no) a global shared secret text string (key) used to communicate
key
with any RADIUS host. If no key is set, the user is prompted for the key. Entries made at
this prompt echo the asterisk (*) character, and the user must enter the same string twice.
•
login-lat-group
communicate with any RADIUS server. If no key is set, the user is prompted for the key;
entries echo the asterisk (*) character, and the user must enter the same string twice.
•
retransmit
to authenticate with any RADIUS server. Default is 1. To disable retransmissions set it to 0
(zero). Range is 0-5.
•
timeout
request to any RADIUS server. Default is 3. Sets . Range is 1-60.
show radius
RADIUS settings.

reload

Reboot or shut down the system.
reload
force
halt [noconfirm]
noconfirm
132 reload
—Set a port for RADIUS; default is 1812. You can use the same IP
—For this host, set or clear, (with no) a shared secret text string
—For this host, set or clear (with no), the string that identifies the
—For this host, set or reset to zero (with no), the number of times the
—For this host, set or reset default (with no), the timeout for retransmitting a
—Set or clear (with no), a global shared secret text string (key) used to
—Set or reset to zero (with no), a (global) number of times the client attempts
—Set or reset to default (with no), the (global) timeout for retransmitting a
Media Flow Manager Administrator's Guide
Copyright © 2010, Juniper Networks, Inc.